No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
The F profile may be used to start and finish off a lean-to rafter system roof, rather than using a glazing bar fitted with a side trim.
The glazing material is fitted into the jaws of the F profile, leaving a suitable gap for expansion.
The stalk of the F profile is usually placed pointing down, but it may be upturned to enable fixing directly against a wall. When used in this way it should be flashed over to create a watertight join.
This profile may also useful when fixing multiwall polycarbonate as secondary overhead glazing.
The F profiles are available for use with 6mm, 10mm, 16mm and 25mm glazing in mill finish, white and brown. 6mm & 25mm profiles are available in 4m lengths only with 10mm and 16mm available in 3m, 4m and 6m lengths.
If you have a project in mind or would like help or advice on any of our products or services, please either ring us on 01925 826314, email us at email@example.com or get in touch via the enquiry form on our contact page.