No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
Multiwall polycarbonate is a high quality, versatile glazing product that can be used as an alternative to glass in many applications.
We can provide you with multiwall polycarbonate in set sheet sizes with the following thickness: 10mm, 16mm and 25mm.
These are available in clear, opal or bronze tints, in a range of widths and lengths.
They have a coating to both surfaces that prevents the transmission of UV in natural sunlight.
Please note: These sheets may not have a block edge and do not come pre-taped.
If you prefer to have your sheets cut to your exact measurements and taped then please visit our Multiwall Polycarbonate Cut-to-size page.
The following table lists the maximum recommended glazing centres for installing multiwall polycarbonate on a sloping roof:
Should you want to exceed these glazing centres it is recommended that you install intermediate rafters, purlins or noggins and fix the sheet on to these with the use of polycarbonate fixing buttons. However, please note that this necessitates drilling holes in the sheet with the subsequent risk of future water ingress. Wherever possible we would advise installing to the sheet manufacturers' recommended glazing centres as indicated above. If you are building a structure in a very windy part of the country this is especially important.
When combining orders for multiwall polycarbonate glazing with bars/other fixing accessories they may be delivered by more than one carrier and on different days. This is because we source our merchandise from different suppliers in order to offer a wide range of quality products.
Multiwall sheet longer than 6m may be subject to longer lead times.
If you have a project in mind or would like help or advice on any of our products or services, please either ring us on 01925 826314, email us at enquiries@birchwoodtrading.co.uk or get in touch via the enquiry form on our contact page.