No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
The P261 rafter glazing bar system is designed to sit on rafters with a minimum width of 60mm. It consists of a 60mm wide gasket that is attached to the rafter using galvanised nails (not supplied) every 300mm along its length and a screw-down aluminium capping bar fitted with bubble gaskets that should be screwed down every 300-350mm. Plastic screw cover caps should be used with the capping bar screws. A polycarbonate push fit end plate finishes off each bar.
The P261 glazing bar system can be used to glaze multiwall or solid polycarbonate as well as glass up to 24mm thick. We recommend replacing the standard end plates with an aluminium mechanical end plate when installing glass. You should contact your glass supplier regarding recommended rafter sizes and glazing centres.
The P261 is also available with a wider, angled cap to accommodate a hip, reference P261H.
This glazing bar system is stocked as individual packs in white, brown or aluminium mill finish in a range of lengths.
Additional individual end plates are also available separately.
If you have a project in mind or would like help or advice on any of our products or services, please either ring us on 01925 826314, email us at firstname.lastname@example.org or get in touch via the enquiry form on our contact page.