No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
Polycarbonate Fixing Buttons can be used to give additional fixing strength to multiwall polycarbonate roofs, particularly where wind and/or snow loading is a concern. The polycarbonate fixing buttons are designed to secure multiwall polycarbonate sheet to timber supports such as rafters or purlins and can also be used when an installer glazes a sheet of multiwall polycarbonate at centres greater than those recommended by the manufacturers.
Polycarbonate fixing buttons should be screwed through pre-drilled holes in the multiwall polycarbonate sheet into the rafter or purlin. The sheet should be drilled before fitting to allow dirt, dust and swarf to be removed from the flutes and the holes should be drilled oversize by 3mm at 300mm intervals.
The polycarbonate fixing buttons are sold in packs of 10, complete with foam washers, wood screws and screw cap covers. The foam washer should be fitted between the button and the sheet as natural thermal expansion will mean the sheet will move when fitted.
Note: Although we supply fixing buttons, these are not a highly recommended, long-term method of securing polycarbonate glazing to a structure. Due to the natural movement of the sheet through expansion and contraction, leaking may eventually occur through the fixing button and the hole drilled in the polycarbonate. We would always advocate glazing to the recommended centres, using a suitable glazing bar system.
If you have a project in mind or would like help or advice on any of our products or services, please either ring us on 01925 826314, email us at firstname.lastname@example.org or get in touch via the enquiry form on our contact page.