No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
The P261 rafter glazing bar system is designed to sit on rafters with a minimum width of 60mm. It consists of a 60mm wide gasket that is attached to the rafter and a screw-down aluminium capping bar fitted with bubble gaskets that should be screwed down every 300-350mm. Plastic screw cover caps should be used with the capping bar screws. Also included in the pack is 1 end plate which finishes off each bar.
The P261 glazing bar system can be used to glaze multiwall or solid polycarbonate as well as glass. We recommend replacing the standard end plates with an aluminium mechanical end plate when installing glass. You should contact your glass supplier regarding recommended rafter sizes and glazing centres.
This glazing bar system is stocked as individual packs in white, brown & anthracite grey (RAL7016) in a either 3m or 4m lengths.
Additional individual end plates are also available separately.
If you have a project in mind or would like help or advice on any of our products or services, please either ring us on 01925 826314, email us at [email protected] or get in touch via the enquiry form on our contact page.